High performance LED tubes for electromagnetic control gear (CCG) and AC mains, for applications with high ambient temperature. : LED replacement for classic T8 fluorescent lamps with G13 socket for use in CCG luminaires or on AC mains. Very broad ambient temperature range: -20…+80 °C. Low flicker according to EU 2019-2020 (SVM ≤ 0.4 / PstLM ≤ 1). Lifetime at 25 °C ambient temperature up to 75,000 h. Lifetime at 80 °C ambient temperature up to 17,500h. Type of protection: IP20. ENEC 10 VDE mark. Mercury-free and RoHS compliant. : Suitable for high ambient temperatures of more than +80 °C. Very high resistance to switching loads. High luminous flux for sophisticated lighting tasks. Quick, simple and safe replacement without rewiring. Energy savings of up to 62 % (compared to T8 fluorescent lamp). Instant-on light, therefore ideally suitable in combination with sensor technology. Also suitable for operation at low temperatures. : General illumination within ambient temperatures from -20…+80 °C. Illumination of production areas. Industry. : Replacement starter for LED tubes. : When used to replace a T8 fluorescent lamp the total energy efficiency and light distribution depends on the design of the lighting system.. : Before installation it is recommended to be checked, if the luminaire and especially the holders are in good condition and capable of carrying the weight of the lamp.. Only suitable for temperatures of up to 80 °C inside of the luminaire.. Not suitable for operation with electronic control gear.. Operation in outdoor applications in suitable damp-proof luminaires possible according to data sheet and installation instruction.. Not suitable for emergency lighting.. Disconnect mains before installation..